msd 6 btm
Moderator: Team
-
- New Member
- Posts: 3
- Joined: Wed Dec 22, 2021 8:10 pm
- Location: san jose ca
msd 6 btm
Has any body ran the msd 6 btm with out locking the timing out I am running a roots blower with about 12 pounds boost with a pro billet dist and would like to run around 20 degrees initial and 12 or 14 would give me 32 or 34 total all in by 2500 rpm but there's no way unless I run the digital e curve dist. but the main thing here is do I lock it out or not an[/img][/img]d I know I need to phase the rotor in, thanks .
You do not have the required permissions to view the files attached to this post.
-
- HotPass
- Posts: 604
- Joined: Tue Nov 30, 2021 8:47 am
- Location: West Milford, NJ
- Contact:
Re: msd 6 btm
Running the lightest (silver) springs will advance full timing before 2500 rpm.
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278