Erson BBC Cam ID Help

Engine tech, for those engines, products, and technologies of yesteryear.

Moderator: Team

Post Reply
EW99
New Member
New Member
Posts: 2
Joined: Mon Sep 12, 2022 3:05 pm
Location: Memphis

Erson BBC Cam ID Help

Post by EW99 »

Does anyone have an old Erson Catalog that could provide the specs for an older Erson Solid Roller, BBC Cam? I've call and asked the folks at Erson a few times about this cam now, but they never seem to be able to find the specs...
You do not have the required permissions to view the files attached to this post.
Top
EW99
New Member
New Member
Posts: 2
Joined: Mon Sep 12, 2022 3:05 pm
Location: Memphis

Re: Erson BBC Cam ID Help

Post by EW99 »

John at Erson sent me the specs on this cam late yesterday. Thanks to anyone who might have spent a little time digging thru old catalogs to help me out on this.
You do not have the required permissions to view the files attached to this post.
Top
In-Tech
Vendor
Posts: 2823
Joined: Wed Apr 21, 2010 4:35 am
Location: Fresno, CA

Re: Erson BBC Cam ID Help

Post by In-Tech »

Have John regrind that for ya with newer .450/.430. Those are old Sig/Babe lobes break parts. Or Mike Jones, those old lobes are junk.
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
Top
Post Reply

Return to “Vintage/Classic/Historical Engine Tech”