Hey guys,
Trying to help someone on one of the car forums I spend time on. He is in Europe and his machine shop already ground the crank to .040 without checking to see if bearings were still available. The mains are used in a lot of Olds engines but I cannot find anyone who has them in .040. Checked with all of the sources I can think of including Egge, Kanter etc so I figured I would try here. Here are the part numbers if anyone has some old stock sitting around:
Clevite MS805P40
Federal Mogul 4281M40
King MB5514AM40
ACL 5M805P40
Thanks,
Bill
Looking for a set of .040" under Olds 330 mains
Moderator: Team
-
- Guru
- Posts: 1762
- Joined: Wed Aug 26, 2009 8:30 pm
- Location: Beautiful Southern Maryland
- Contact:
Looking for a set of .040" under Olds 330 mains
Bill Koustenis
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
-
- New Member
- Posts: 18
- Joined: Fri Feb 14, 2020 7:05 am
- Location: Fate, TX
Re: Looking for a set of .040" under Olds 330 mains
Time for another crankshaft??
https://www.oldsobsolete.com/products-p ... gm-381919/
or maybe??
https://precisionengine.com/contact-us/
https://www.oldsobsolete.com/products-p ... gm-381919/
or maybe??
https://precisionengine.com/contact-us/
Re: Looking for a set of .040" under Olds 330 mains
Hi Bill,
My bud has a set of Vandervell 91261 @ 40
$150 + shipping from California. I can grab them and ship to wherever. PM if interested.
My bud has a set of Vandervell 91261 @ 40
$150 + shipping from California. I can grab them and ship to wherever. PM if interested.
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
-Carl
Re: Looking for a set of .040" under Olds 330 mains
On the way to Norway
You do not have the required permissions to view the files attached to this post.
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
-Carl
-
- Guru
- Posts: 1762
- Joined: Wed Aug 26, 2009 8:30 pm
- Location: Beautiful Southern Maryland
- Contact:
Re: Looking for a set of .040" under Olds 330 mains
Glad it worked out !!!! I know he is pleased.
Bill Koustenis
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Advanced Automotive Machine
Waldorf Md
www.enginerepairshop.com
Re: Looking for a set of .040" under Olds 330 mains
They arrived unscathed. I spent a bit of time packaging those fockers Happy to help
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
-Carl