Hey guys,
I have Torque Thrust D wheels on my street car. I'd like to keep them on my car. The set I have now are 15 x 8.5 with 3.75" BS.
Problem is, there is not enough backspacing on them so my tire hits the wheel lip but there is 1.5" inside the wheel before there is any interference. Section width on the tire is 11.2".
My question is:
Is there anyone that can modify a set of these wheels to get the back spacing I need? I need either an 8.5" wheel with ~4.75" or a 10" wheel with ~5.5" of back spacing (and their 10" wheel only has 3.75" of BS too).
Thanks for any help, info or leads.
Wheel modification?
Tech questions that don't fit above forums
Moderator: Team
-
- Member
- Posts: 126
- Joined: Thu Aug 09, 2007 1:46 am
- Location: SW Montana
Jump to
- Speed-Talk
- ↳ Announcements
- ↳ In Memory of Don Terrill
- Technical
- ↳ Engine Tech
- ↳ Advanced Engine Tech
- ↳ Vintage/Classic/Historical Engine Tech
- ↳ Chassis / Suspension / Body
- ↳ Electric & Hybrid Vehicle ** NEW **
- ↳ Shop & Garage Tech
- ↳ General Tech
- HotPass Members & Guests
- ↳ Subscribe to HotPass
- ↳ Speed-Talk Vendor Marketplace
- ↳ 3V Performance Engine & Valve train Development
- ↳ Auto Gear Equipment
- ↳ CCA Racing Products
- ↳ Competition Fuel Systems
- ↳ Heads 1st
- ↳ Jones Cam Designs
- ↳ Koehler Injection
- ↳ Lightning Racing Carbs
- ↳ MaxRaceSoftware
- ↳ PBM-Erson
- ↳ Schmidt Motor Works
- ↳ Speier Racing Heads
- ↳ Stan Weiss' Software
- ↳ TFX Engine Technology Inc.
- ↳ Speed-Talk interviews
- ↳ David Vizard forum
- ↳ HotPass Advanced Tech forums
- ↳ Valve Train
- ↳ EFI
- ↳ Supercharging
- ↳ Chassis setup
- ↳ Transmission & Gearing
- General Category
- ↳ Industry / Business
- ↳ Show & Tell
- ↳ Forum Help / Questions / Tips
- Classifieds
- ↳ Race Cars & Parts - For Sale or Wanted
- ↳ Shop Equipment - For Sale or Wanted
- ↳ Other - For Sale or Wanted
- Offtopic forums
- ↳ Offtopic Forum